Search results

Before dumping your RBH subs you may want to call RBH and inquire about upgrading to their SE/R versions which employ their new higher excursion drivers and more powerful amps.

The only reason it would do that is if the input signal is too low and the auto on/off circuit times out. I can't recall if the sub has a always on power option. If it does, try that. Also try turning up the sub level of your AV receiver and turning the sub level down on the sub to see if...

DTS has the potential to be sonically superior to DD not just b/c of less compression but also better separation in the surround channels. I had a detailed discussion about this with a head guy at Dolby years ago and he acknowledged it. DD was designed to be efficient so it could easily stream...

I've been wondering this myself for a long time but have been unable to arrange an interview with anyone at Dolby or DTS to uncover the reasoning why.

I seriously doubt the DSP delay is more than a few ms which would equate to a distance of 2-3ft. I've never run across a DSP sub that had more delay than that! This is a NON issue as evident when Josh measured the summed response of the sub with his main speakers in his room and didn't have...

Hey guys, let's try to be a little reserved regarding Mark Shifter and posting these threads on this forum about him. Hopefully he learned from the consequences of his actions and is remorseful and growing spiritually as a result. It doesn't feel right taking pleasure in other people's misery...

Excellent points as always. I think we all could agree, if we could match the 3 front speakers with vertical arrangement of drivers, that would be the best solution. But this involves using a Perforated screen and not mounting the screen against the wall, unless you use an in-wall center channel.

I am sure many will disagree with me but I still find a well designed MTM can perform admirably horizontally oriented as a center channel provided you don't sit that far off axis. The advantage of an MTM over a W(T/M)W is you have more efficiency in the critical midrange area (500hz-2kHz) by...

agreed, recording quality is top notch too. Steve has done a fabulous job combining the best of progressive rock in the 70s while also adding his own flare to it. But don't put this disc on if you're looking to cheer up a dull day ;)

Hmm I based my review on a $499 price but if they raise the price it will of course lower the value rating I assigned it at the time. If you click into their product page it says $499: EMP Tek ES1010i Subwoofer The $399 price was a short term sale as they are probably trying to get this...

Wow this is certainly turning out to NOT be a “Good Friday”. It’s unfortunate that Axiom posted this without consulting with me first to examine the facts but I can understand their frustration. The reality of this situation is I hired a close friend of the family about 4 years ago who is now...

I recommend you run the towers full range and crossover the center and surrounds at 80Hz. If the center is placed in a cabinet, try plugging the ports and using some Auralex Mopads to isolate it from the shelf like I discussed in the review. If your tweeter is buzzing, have EMP send you a...

It's a very valid point that I've been considering for a long time. The EMPs don't play that low but they play extremely loud and you can't bottom out the woofers as a result. If you mate them with 1 or 2 subs and run them full range, you get plenty of deep bass and lots of mid bass slam from...

The dips in the 200-300Hz range is a measurement anomaly and is NOT product related. Had I measured the speaker using Groundplane below 300Hz, the issue wouldn't be there but I also would be missing port contribution. Going forward I will likely do this when measuring in-room or perhaps do a...

They did a setup like this at our 2007 SOTU event which was quite a popular room. It was a great show for all involved. Audioholics 9th Annual State of the CE Union Show Report — Reviews and News from Audioholics

14/4 has an effective gauge of 11AWG when using all 4 conductors to single wire a speaker. It is easier to terminate and more flexible than 10AWG. I use 10AWG all throughout my house and it's a pain in the A55 especially when trying to terminate it to a VC or in-wall speaker.

No but the remote on the old RX-Z7 is good enough and its what I use. I agree, get a separate remote and I probably should update the article. I am not much of a remote person as I am too lazy to program them, especially since I'm always changing out gear. Acoustic treatments are important...

Guys lets keep the personal bickering off this thread and focus on a tech discussion on the subject at hand which is this new Axiom speaker.

I'm not sure what you mean but I suspect your talking about vertical scale resolution. I wrote an article about this: Audio Measurements: The Useful vs the Bogus

No set of measurements will truly tell you how a speaker plays into a room or how it will ultimately sound. They are useful for determining design problems however. As far as I am concerned a speaker that measures good will usually sound good but a speaker that measures bad will usually not...