RSS315HF-4 in an svs 16-46 enclosure?

[abboudc]

From what I've read, it seems to model similar to the plus driver.

Bad idea? (before you ask, the 16-46 doesnt have its plus driver in it now)

 

[lsiberian]

From what I've read, it seems to model similar to the plus driver.

Bad idea? (before you ask, the 16-46 doesnt have its plus driver in it now)

Do you know the port size, internal box size minus port? With dimensions i can model you a response chart. I will also check out some TC Sounds drivers I'm pretty sure they used to make some of the SVS stuff.

 

[abboudc]

There are 3, 3" ports, don't know the length, i'll have to see if i can take them out tonight.

It' s a cylinder with 16" diameter and 46" height. So it'd be 9244 minus the port volume and whatever space it taken up by the plate amp.

The amp is a 525W bash amp.

I emailed SVS too, to see if they can provide the port length and volume.

 

[lsiberian]

There are 3, 3" ports, don't know the length, i'll have to see if i can take them out tonight.

It' s a cylinder with 16" diameter and 46" height. So it'd be 9244 minus the port volume and whatever space it taken up by the plate amp.

The amp is a 525W bash amp.

You could always use a measuring tape instead? Taking them out will probably destroy the box. Do you know the tuning by chance? That would tell me the length. NM I got it it's 16hz. I don't need the lengths. I am not at home, but maybe you can get Mike to run some drivers.

 

[abboudc]

Just heard back from Ed Mullen :
The 16-46 PC-Plus port length is about 32" from flare-to-flare.* The port ID is 3".* The woofer and port end-caps are about 1.5" thick.* The ID of the tubing is about 15.5".