ITS ALIIIIIVE! My 1978 JVC receiver

P

Puddintane

Audiophyte
I looked, all I could find was the Brochure, I don't ever recall having a manual for the turntable. I still have the receiver, cassette, 1st cd player and first surround processor.
That helps a lot. Thanks for the info. One other question if I may. Do you understand how to use the "Overhang" mark (bullseye?) that can be found on the plinth between the platter and the headshell when the latter is sitting on the tonearm rest (I'd post a pic, but I haven't enough posts yet to allow it)? That's one thing I was hoping to find explained in the manual.
 
DTS

DTS

Senior Audioholic
I am not sure, maybe a picture will trigger a thought.
 
Seth=L

Seth=L

Audioholic Overlord
Okay, now let's see if it will work...



You can see the "overhang" mark there next to the platter.
The bullseye "Overhang" is a calibratory tool so you can correctly position the cartridge and stylus in the headshell.

Aligning the cartridge is critical to getting the best sound and minimizing record wear. If your turntable came with an overhang gauge, you're in luck. Simply insert the headshell, keeping the cartridge firmly attached but still moveable. Then line up the stylus tip with the markings on the gauge. Usually, this is all that's required to achieve proper alignment. (Overhang and alignment are actually two different matters. Overhang refers to the position of the cartridge in the headshell relative to the platter spindle. Alignment refers to its side-to-side orientation. However, most overhang gauges handle both.)
Source
 
P

Puddintane

Audiophyte
The bullseye "Overhang" is a calibratory tool so you can correctly position the cartridge and stylus in the headshell.
Thanks Seth=L. That's what I assumed it was for. And I found a manual online for a similar model that explained how to use it (which was also pretty much what I had assumed ). I guess I was just looking for a little affirmation. ;)
 
S

soundn00b

Audiophyte
I realize that this thread is somewhat old, but it's the only one I could find when I searched for JVC JR-S400. I've had this stereo for a while now, it was actually passed down to me from my dad (came with some pretty nice Polk Audio bookshelf speakers too). Just recently, though, the unit began smoking and stopped working. I had someone at the house to do some painting, and I was in my room (other side of the house) with the door shut. I smelled something burning so I bolted for the living room to find this jackass painting away while my stereo receiver is over in the corner billowing smoke! Obviously I wanted some kind of explanation, so I ask him why he didn't come and tell me my stereo was on fire. He said that he didn't know that I was home, but that he had unplugged the unit to move it so he wouldn't drip paint on it. He then said he had plugged it back in once he had finished that area. This whole time the unit was on. The receiver no longer works, and I'm bummed that all I have are my laptop speakers now. My question is for experienced owners of this model: What could have caused this (and much more importantly) where do I start with diagnosing the issue and resolving it? I suspect that the issue is with the black box (am I guessing right that it's a power supply?) shown in the picture below (OP's picture, using it for reference). I felt that box immediately after I unplugged it and yanked the cover off, and it felt very hot. Anyway, I'd love to be able to resurrect this thing because I love the crap out of it so any help would be greatly appreciated.

Thanks,

Henry

Ok nevermind, apparently I'm too much of a n00b still to be able to post pictures, so reference OP's third picture to see what I'm talking about.
 
B

bikdav

Senior Audioholic
Vintage Is Nice

These receivers brings back memories. I had the JRS-200. That receiver was my first venture into hi-fi. A guy that I new years ago had a Pioneer receiver similar _ but not the same model _ to the other one pictured. He somehow mounted that receiver and an old Dual turntable in an old stereo console. The speakers were not in the console [for obvious reasons], but at the other end of the room _ EPI 70s if I remember correctly.
 
Last edited by a moderator:
DTS

DTS

Senior Audioholic
Sorry to hear about your receiver. I am not sure what could cause it, but there are a lot more tech savvy people here than I am. Hope you can get it back in action.
 

Latest posts

newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top