Official Panasonic TC-P42S2 owner's thread? Looking for some setup settings.

[FuzzyReets]

Hi folks. Just picked up the TCP42S2. Looking for some base settings to work with one someone that might have calibrated this or a TCP42S2 owner's thread. Anybody? Thanks.

 

[nimbuscrenel]

I'm interested in this too. I just picked mine up yesterday. Now I'm just waiting on my mount from Monoprice...

 

[Patrukas777]

Hi folks. Just picked up the TCP42S2. Looking for some base settings to work with one someone that might have calibrated this or a TCP42S2 owner's thread. Anybody? Thanks.

TC-PxxS2 Reference Settings

Picture:
Picture Mode: Cinema
Contrast: 71
Brightness: 60
Color: 47
Tint: G9
Sharpness: 0
Color Temp: Warm
x.v. Color: Off
C.A.T.S: Off
Video NR: Off
Blur Reduction: Off

Advance Options
MPEG NR: Off
Black Level: Light
3:2 Pulldown: On

Service Menu Offsets

WB-ADJ MENU
R-DRV: +5
G-DRV: -11
B-DRV: -11
R-CUT: -2
G-CUT: 0
B-CUT: +4

http://www.avsforum.com/avs-vb/showthread.php?p=18252425#post18252425

 

[nimbuscrenel]

Thanks Patrukas!

 

[Patrukas777]

Thanks Patrukas!

No Problemo

 

[SopRage]

Check out TweakTV.com

 

[wgmontgomery]

Set-up details

Hi...I am new to this site and wondered if anyone has info on accessing the service menu to use the settings listed here. I am aware of the risks involved as I once worked in the repair dept. of a high end store. During that time I did countless calls that required me to go into service menus, so I know what I am doing.

I don't, however, remember the sequence needed to get into the service menu. I was a bit strange on Panasonics and may have changed anyway.

So...does anyone know the procedure to get into the service menu and some reference settings for picture? I have a 42S2, and it is "broken-in" already. Thanks in advance for any help!

 

[wgmontgomery]

Panasonic TC-p42s2

I am attempting to use the reference settings on this post, but I can't seem to find the listed values in the service menu. I have the WB Method set to 00 as posted, but the values posted are NOT even within the menu's parameters. Am I missing something? Thanks