I am selling my MPS-1 200w x7 Emotiva Amp.
It has a little over 2 years left in the transferrable 5 year Warranty. May 2012.
Here are the specs:
• Audiophile quality, modular power amplifier
• True card cage design can accommodate up to seven 200 watt (@8 ohms) mono block power modules - power modules glide in and out on Nylon rails
• 200 watt power modules feature independent 350VA low noise toroid power transformers w/ high speed rectifiers and low ESR 105°C power supply capacitors
• High efficiency Class H power amplifier design, minimizes power losses and allows cool operation
• Complementary, discrete power amplifier design incorporating high current, high speed, Toshiba power devices
• Truly transparent, integrated soft clip circuitry
• Balanced XLR and RCA inputs
• Channel status indicators for standby, operate, and fault
• THD less than .015%, 20Hz-20kHz with 80kHz measurement bandwidth
• DC offset, less than 1mv, servo controlled
• Completely Stable into 2 ohm loads
• 200 watts/8 ohms – 300 watts/4 ohms – 400 watts/2 ohms - seven channels driven, mains limited
• Frequency response 20Hz-20kHz +/- 0.1 dB, or 10Hz-125Khz +/- 3dB
• Signal to Noise Ratio - 100dB, un-weighted
• Input impedance - 20k ohms
• Crosstalk between ANY channels – greater than 120dB
• Fully protected from all fault conditions with ultra quiet, module mounted, fan assisted cooling for severe duty cycle applications
• Soft start circuitry. Silent turn on/off - No audible transients
• Signal sensing auto turn on or remote trigger Soft touch power switch
• All aluminum capacitors are premium quality, low ESR, 105°C rated for high reliability and performance
• Doubled sided, plate through, glass epoxy, FR4 PCB’s used throughout with 2 ounce poured copper on all power sections and ground planes
• Modules are designed for field replacement with the removal of four screws
• 4RU chassis with floating multi-element, milled aluminum faceplate. Indirect cobalt blue illumination of all controls and main panel
• Black lacquered, piano finished wood side panels are included, as are milled aluminum rack ears for professional installations
• Massive, multi element milled aluminum faceplate with "floating” wing detail – indirect, cobalt blue panel illumination with panel dimmer
• Power consumption during standby – 3 watts or 60 watts at idle
• IEC power inlet, 120/230 VAC user configurable on modules
• 5 year warranty
• Weight - 115 lbs
• Dims: (HxWxD) 7 11/16” x 18 7/16” x 18 7/8"
My Pictures:
Front:
Back:
Top:
Module Top:
Module Back:
Modules:
Overall condition is great. The unit is just coming back from Emotiva for a small issue with one channel not turning off with the 12v trigger. This has been fixed and the unit is in perfect working order.
I have 2 of the 3 original boxes. The chassis and the box with 2 modules are all in the original double boxes. I am missing one module box (still looking) and the outer box of the 5 modules. I will load one module in the chassis and I have another box to hold the 4 other modules. I do not have original wood sides. They were wider than my other components and I don't know what happened to them (ie wife).
For members I am asking $1300 shipped with a shipping value up to $150 bucks. If less than 150 I will credit you back and if more buyer covers it. Warranty is transferrable so 2 years left.
Audioholics did a great review here
http://www.audioholics.com/reviews/amplifiers/emotiva-mps-1 if you are not familiar with this amp.
I have 100% positive feedback on Ebay, audiogon and have sold here before with great results. I will take either a money order or paypal for payment.
Thanks.
