Attn box builders - what type of terminals do you use?

[GlocksRock]

My friend is almost done with one of his kappa build boxes, but still hasn't decided on what terminals to use, I was wondering if anyone could offer some suggestions, and if possible some links to specific products.

 

[lsiberian]

My friend is almost done with one of his kappa build boxes, but still hasn't decided on what terminals to use, I was wondering if anyone could offer some suggestions, and if possible some links to specific products.

http://www.madisound.com/catalog/product_info.php?products_id=1026

That's what I use. For an already completed box it will be harder. Unless you happen to have a hole saw.

 

[GlocksRock]

That's the type of terminal he uses for his car audio speaker boxes, was just wondering if there was anything nicer looking that could be used. But those are good terminals.

 

[Matt34]

I used these on my DIY Rythmiks and now on the Tuba HT.

............


Edit: Well I would show you but I can't get PE to come up.

 

[gmichael]

I like overkill.

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=260-314

 

[sawzalot]

I remembered seeing these you buy the plates separate from the posts the plates come in a few different colors, silver , blue, black and maybe gold heres the link:http://www.parts-express.com/catalog/pdf/2010/158pec10.pdf

I think this is the actual catalog page ;http://www.parts-express.com/pe/pshowdetl.cfm?Partnumber=091-602

 

[lsiberian]

http://www.madisound.com/catalog/product_info.php?products_id=1574

maybe this is what you want.

 

[avaserfi]

I use these. They are small can fit most anywhere you want and look good. No need for the plate unless you like the looks. Just use o-rings to ensure an airtight seal.

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=091-1245 &FTR=091-1245&CFID=12963298&CFTOKEN=96422405

 

[highfigh]

I like the way these look on the cabinet but they don't have any protection from shorts if something conductive ends up across them.
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=091-1247

I'll probably use these next time:
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=260-312

I like the look of the anodized aluminum but I'd rather not put two terminals with opposite polarity in a conductive plate.

 

[Swerd]

These from Madisound are similar to those PE posts, but cost a little less:

http://www.madisound.com/catalog/product_info.php?products_id=146

http://www.madisound.com/catalog/product_info.php?manufacturers_id=122&products_id=145

I also like these:

http://www.madisound.com/catalog/product_info.php?products_id=152

http://www.madisound.com/catalog/product_info.php?products_id=151

 

[j_garcia]

I like overkill.

Then you should be using these:

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=093-562

Those look like are what are on the XP* amps from Emotiva.

PE now has their own version of them:

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=091-630