hi my name is jason and i have tried again and again with the DVE disc and i kept messing it up.This is what i get from the disc.
1.brightness: Adjust so the blacker than blacker is just barely visible on the backround .(works on panasonic plasma but my optoma hd70 clips that signal). With the optoma i can just see two lines 4% and 2% above black. I move the control until the inside line (2%) is just barely visible.
2. contrast: I used the ramps to adjust for white but no matter how high i turn the contrast on the optoma and panasonic i can not get white to clip. So this is where i am stuck because i do not know when it is right. now this leads me to the color ( the part i can not get an answer to anywhere)
3. Color: I get it on the panasonic because it only has color/tint so i use the blue filter until the backround blends in together but leaves the black squares, but on the optoma it has color/tint and
green
red
blue
green bias
red bias
blue bias
so how do i use DVE to adjust all of the colors? Do i use each of the filters to adjust each color?(there is a blue,red,green filter that came with the disc). Or do i leave the other colors on default and just use the color/tint.
here are the screen shots of the menu system and maybe this will give someone a better idea what i am talking about.
http://www.projectorreviews.com/opto...erformance.php
if you scroll down you will see both the color/tint and under advanced are the gain/bias.
Any help or a web site that will explain this would be greatly appreciated. I have been looking for an explanation on many different web sites with no answers. I can not believe someone else has not asked this question. I just bought a new carada 92 inch brilliant white screen and want to calibrate it myself if i can. I will also give someone a draper custom 106 inch gray pull down if someone wants to come show me how to set up my display. I live in martinez ca.
