"Let our rigorous testing and reviews be your guidelines to A/V equipment – not marketing slogans"
Toggle sidebar Toggle sidebar

Help Finding Raw Vifa Drivers for Group DIY Bookshelf Speaker Project

  • Thread starter Thread starter 5th Beatle
  • Start date Start date
5

5th Beatle

Junior Audioholic
Feb 17, 2005
53
0
8
71
North Atlanta
The particular Vifa drivers we are looking for appear not to be available from the usual suspects, so I am seeking help from audiholics members who may have extra raw drivers or know someone who does. What we need:

Vifa D25AG-05-06 1" dome tweeter (2)

Vifa P17WJ-00-08 6.5" woofer (2)

Thanks so much for your help. Bookshelf design to be patterned after the late Georgia Tech professor Dr. Marshall Leach.

Regards,

5th Beatle
 
5th Beatle said:
The particular Vifa drivers we are looking for appear not to be available from the usual suspects, so I am seeking help from audiholics members who may have extra raw drivers or know someone who does. What we need:

Vifa D25AG-05-06 1" dome tweeter (2)

Vifa P17WJ-00-08 6.5" woofer (2)

Thanks so much for your help. Bookshelf design to be patterned after the late Georgia Tech professor Dr. Marshall Leach.

Regards,

5th Beatle
Click to expand...

Those are from the long discontinued Vifa Classic line. The chance of finding them is remote.

I would pick a design using currently available drivers.
 
I had a pair of the 6.5 woofers that I used in my old EPI Model 140s (I bought them sometime in the late 90s), but they are long gone. You may have already seen this Parts Express page, which has a driver they claim is a good replacement for the Vifa:

http://www.parts-express.com/projectshowcase/indexn.cfm?project=vd

In case you need them, here are the specs I found for the Vifa woofer and tweeter from my old Madisound catalog page:

P17WJ-00 6.5 " woofer
Impedance-4 or 8 ohms)
Fs-37 Hz
Qts-.35
Vas-35 liters
X max-4 mm
Power handling-70W
Sensitivity-88 dB (2.83V/1M)

D25AG-05
Impedance-6 ohms
Fs-1500 Hz
Sensitivity-90 dB (2.83V/1M)

Hope this helps with your search.
 
Thanks Audiofox! Exactly what I need for speaker matching if we can't locate those discontinued Vifa's. Appreciate the links, too:D
 
i would second the suggested contact to madisound, they suggest the Seas Prestige 27TBFC/G (h1212) Aluminum/Magnesium driver to be a good replacement/upgrade for the discontinued vifa. Its cost is listed as 45.35 per driver.
 
You know there really is no such thing as one driver replacing another.

If it is quality you are after, if you change drivers, it means starting the design from scratch.

I have never seen two different drivers with close enough T/S parameters and acoustic response, that results won't be significantly compromised by driver substitution.
 
TLS Guy said:
You know there really is no such thing as one driver replacing another.

If it is quality you are after, if you change drivers, it means starting the design from scratch.

I have never seen two different drivers with close enough T/S parameters and acoustic response, that results won't be significantly compromised by driver substitution.
Click to expand...

That's not even including the fact that not all 6.5" woofers fit in the same size holes either. In a pinch a jigsaw and circular saw could be used to build some boxes for the drivers. It would let you cut some bracing and tune the box for the appropriate fill.

But if this is a science experiment I understand the goals are different. Is that the tweeter in my RB Kits?
 
Last edited:
Hi all,

I happened to stumble across this thread and wanted to say that I built these Leach 2-way speakers while the original drivers were still available. I used the alternate 4ohm/8.2ohm resistor change for the tweeter attenuator. I have really enjoyed them. They are an excellent, fine sounding design. I liked them so much I bought Prof. Leach's book and have designed a couple other speakers using his recommended procedure.

Madisound sells the ScanSpeak Classic P17WJ00 6.5" Woofer that is supposed to be the equivalent, and unbelievably Parts-Express has the Goldwood GT-324 1" Titanium Dome Tweeter that is very close although the impedance is a little off. A $10 each, I might just have to buy a pair and swap out my Vifas for comparison.

Good luck.
 
wct

If you are still interested in these Vifa p17wj drivers I have four of them. If you would like to discuss it further let me know. I also have four Vifa d26tg-35 dome tweeters (1 damaged).
 
Any chance that you still have the Vifa P17WJ speakers?
 
You must log in or register to reply here.

Latest posts

newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top
Back