How do I mount bookshelves on ceiling for atmos

[samx]

I recently replaced my old Elite with x3500h and would like to use my two spare JBL 130 bookshelves as atmos speakers directly above the seating position (facing down). I have a 5.1 JBL studio 9 series + SVS sub config presently so the 130s will timbre match perfectly. My question is how to mount these 11-12 lb speakers on ceiling? I have purchased keyholes (2/speaker) and can drill screws into joist to hang these but need advise if there is something better than what I plan on doing.
Thanks!

 

[William Lemmerhirt]

I’d probably try something like this.
https://m.cdw.com/product/peerless-paramount-universal-speaker-mount-psp2-mounting-kit/1686579

Also, assuming you’re only doing 5.1.2, is mount them slightly in front of the couch vs directly above it. Like this...

 

[samx]

Yes, this receiver maxes at 5.1.2. Do I have to angle speakers if they are not directly above the seating? Those brackets will bring them down a little and my ceiling is only 8 ft high. Thanks!

 

[William Lemmerhirt]

Yes, this receiver maxes at 5.1.2. Do I have to angle speakers if they are not directly above the seating? Those brackets will bring them down a little and my ceiling is only 8 ft high. Thanks!

Yeah, I would angle them towards the LP. Especially since the bracket+speaker will take up a lot of length. How many people do you normally watch with? If it’s only you, I’d point them right at your head. If you have others to consider, I might try the time intensity thing where you’d aim each speaker at the opposing end of the couch.

 

[samx]

Ok, its generally me and wife. The mounts you suggested may not hold these 11 lb bookshelves securely so I am currently looking for adjustable ceiling mounts. Thanks!