Rolling inputs...

[STRONGBADF1]

So this morning I start watching some TV while drinking my tea and everything was as usual. Then out of the blue the input on the TV changes. Well that's odd... So I change it back. A few minutes go by and it changes again. Now I'm thinking one of the remotes is doing it. So I reset the input and pull the batteries from the remotes. Now the TV is rolling through the inputs on its own. I've never seen or heard of this behavior before. I guess a board has failed??? .

Has anyone had this happen to them before?

The TV is a Samsung plasma model PN58C550



I guess it is time for a new tv...

Sent from my SM-G900V using Tapatalk

 

[Alex2507]

I guess it is time for a new tv...

Not without a new rec'r ...

 

[STRONGBADF1]

Not without a new rec'r ...

I'll tell Brenda you said so.





( I'm so proud of you that you didn't bring up how long it took me to buy this TV... )

 

[Drunkpenguin]

Could the input button on the tv itself be stuck?

 

[Alex2507]

BTW, I had an Insignia TV do that and I yanked the remote sensor. That took care of it.

 

[STRONGBADF1]

Could the input button on the tv itself be stuck?

No mechanical buttons on the tv.

Sent from my SM-G900V using Tapatalk

 

[STRONGBADF1]

Finding out its a issue with samsung tvs. Problem is that I can't get into the menu...

I unplugged the TV and I'll look at it again tonight but the 75 inchers are calling my name.

Sent from my SM-G900V using Tapatalk

 

[Alex2507]

the 75 inchers are calling my name

Whoa ... slow down. Let's think about this and not rush into anything.

They'll be cheaper if you wait 10 years.

 

[Drunkpenguin]

Whoa ... slow down. Let's think about this and not rush into anything.

They'll be cheaper if you wait 10 years.

Or 3 days.

 

[STRONGBADF1]

OK then...

I unplugged the TV and then life happened and I came back to it about a half hour ago and pressed the power button on the TV for 60 seconds per a video I saw on youtube and then plugged it in. (it has touch sensors on the TV so I don't know why you would do that...) It's working again! Weird how even the remotes wouldn't work but they do know.

I went into the menu and turn off the "Anynet+ (HDMI-CEC) " since I have never used it because I read that that could also be the problem. The set is eight years old and has never been an issue... All the same hardware has been hooked up for probably three years know.

Anyway... we shall see if it lasts.

 

[STRONGBADF1]

still working fine...


did i just jinx myself???

Sent from my SM-G930V using Tapatalk

 

[lovinthehd]

So did the 75inchers stop calling out?

 

[Alex2507]

I unplugged the TV

Oh yeah, that old trick. I forget about that one if everything works right for any length of time.

Man, I thought we were getting a rec'r!

 

[STRONGBADF1]

So did the 75inchers stop calling out?

for the moment...

Sent from my SM-G930V using Tapatalk

 

[STRONGBADF1]

denon x4400 or x3400 + crown amp(s)???

or just go with another yamaha... its been a tank.

Sent from my SM-G930V using Tapatalk

 

[STRONGBADF1]

or dual subs or accustic treatments or...

Sent from my SM-G930V using Tapatalk

 

[Alex2507]

denon x4400 or x3400 + crown amp(s)???

or just go with another yamaha... its been a tank.

Sent from my SM-G930V using Tapatalk

No amps. There's a beauty in the simplicity of rec'r and speakers.

 

[ImcLoud]

No amps. There's a beauty in the simplicity of rec'r and speakers.

Or the simplicity of a source, volume control, and amplifier, no receiver at all... direct path is sexy, who needs a receiver? lol

 

[Alex2507]

who needs a receiver?

Hey, Irv.

Cheap people need a recv'r.

What volume control are you talking about? It sounds like an expensive pre-pro.

Your systems link just goes to the AH Systems Gallery. I wanted to look.

 

[STRONGBADF1]

Did I just get called cheap?

Sent from my SM-G930V using Tapatalk