Can the fronts and rears be the same?

O

omnomnom

Audiophyte
Hello, I am curious if it ideal to have the same front and rears to have uniform sound all the way around or is it better to have to smaller bookshelves as rear speakers. I'm looking at different systems for comparison and see they all do have smaller rears...is it for price, or for space, or is it just overkill to have larger fronts used in the rear??

Looking at Infinity Primus 363's and Polk RTi8's and see that they have matching smaller bookshelf speakers for the rears.

I would like to use 4 363's as my fronts and rears. Please excuse my apparent ignorance, but is this kind of setup just dumb?
 
Last edited:
j_garcia

j_garcia

Audioholic Jedi
No reason you can't do it. I ran 5 identical bookshelf speakers in my setup for years.
 
zieglj01

zieglj01

Audioholic Spartan
Looking at Infinity Primus 363's and Polk RTi8's and see that they have matching smaller bookshelf speakers for the rears.

I would like to use 4 363's as my fronts and rears. Please excuse my apparent ignorance, but is this kind of setup just dumb?
Speaker choice is subjective - however, the set-up is not dumb and is a good way to go
 
slipperybidness

slipperybidness

Audioholic Warlord
Hello, I am curious if it ideal to have the same front and rears to have uniform sound all the way around or is it better to have to smaller bookshelves as rear speakers. I'm looking at different systems for comparison and see they all do have smaller rears...is it for price, or for space, or is it just overkill to have larger fronts used in the rear??

Looking at Infinity Primus 363's and Polk RTi8's and see that they have matching smaller bookshelf speakers for the rears.

I would like to use 4 363's as my fronts and rears. Please excuse my apparent ignorance, but is this kind of setup just dumb?
To the OP, what do you plan to use for center channel speaker?
 
lsiberian

lsiberian

Audioholic Overlord
It really doesn't matter per Toole's research only speakers hitting the ears from the similar angles need to match.
 
Pyrrho

Pyrrho

Audioholic Ninja
Ideally, ALL of the speakers (other than subwoofers, obviously) will be the same. That way, the tonal balance of the sound will be identical, no matter where it is coming from.

I personally use identical bookshelf speakers for all channels, and will never go back to merely "voice matched" speakers. There is nothing like having identical speakers for voice matching.
 
H

herbu

Audioholic Samurai
I have identical towers for my front L/R and surround L/R, and the center is a match from the same family. I run a 7.2 system, so the surrounds are not really the "back" speakers... they are the surround L/R and are located at the sides of my listening area. I have a completely different pair for my surround "backs".

For movies/TV, it sounds great. However it seems like a very small percentage of sounds come from the surround L/R, (and even less from the backs). I'm not convinced a less expensive pair of bookshelf speakers for the surround L/R would give me a noticeable degradation in the sound of movies/TV.

Now, music may be a different story. Most of the time I listen to music in stereo using only the front L/R and subwoofers. Occasionally when people are over and moving around, I'll use Multi Channel Stereo and it really fills the room nicely. Have just ordered an Oppo bluray player and one SACD to experiment with surround music. I suspect it will sound great, but don't anticipate buying a lot of SACDs, and regular CDs artificially split into surround by the AVR are just not my preference.

All in all, here's my recommendation: If you have the money, go for it. If you have to compromise on the quality of your front 2 speakers in order to afford 4 of them, skip it. Get the best front two you can afford, and spend less on the surrounds. You may sometimes wonder if a couple hotrod speakers on the sides would sound better, but if you buy them you may not notice any/much difference. Just my 0.02.
 
j_garcia

j_garcia

Audioholic Jedi
in fact this is the ideal setup for surround music :)
The main reason why it was done that way :) In the current setup I've got different surrounds but they use the same midbass from the same designer, same -3dB and same sensitivity, so it works out quite well.
 

Latest posts

newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top