Skylabs Audio's top 5 Vintage Amps

Squishman

Squishman

Audioholic General
A Y'all Tube channel I watch sometimes, Skylabs Audio ranked his top five vintage integrated amps under $1000. This guy has a vintage audio store in Des Moines. His list was:
5. Sony TA-1130
4. Sansui AU-7700
3. Kenwood KA-7100
2. Pioneer SA-8500
1. Yamaha CA-1010
I was certain that the Marantz 1060 would be on the list, even high on the list. So I asked him about that. He replied "The 1060 was off, then on, then off. Pushing a grand at 30wpc, we'll put it at number 6 :) "
That's interesting. I got a crazy good deal on mine with a wood cab and not a scratch on the faceplate for $250 earlier this year. Plus mine has never been tampered with (except by me when I cleaned the pots) and sounds gorgeous.
Do you guys agree with his list? I once owned a KA-7100, but not familiar with the others.
 
davidscott

davidscott

Audioholic Spartan
I like to watch Skylabs occasionally I'm surprised he didn't include a NAD in the list. I owned a Kenwood 3500 back in the day, but the NAD I replaced was much better.
 
lovinthehd

lovinthehd

Audioholic Jedi
Haven't ever found integrated amps to be all that interesting to begin with. Just limited generally. What kind of criteria/performance is the ranking based on?
 
Squishman

Squishman

Audioholic General
Haven't ever found integrated amps to be all that interesting to begin with. Just limited generally. What kind of criteria/performance is the ranking based on?
I think sound, input options, pre-outs. He mentioned quality of knobs and faceplate iirc, but not sure if that was a criteria or just about a certain unit. Can't recall every criteria.
 
lovinthehd

lovinthehd

Audioholic Jedi
"Sound"? Lots like the asesthetic it seems, especially with fancy faceplates and good knob feel :) To me they're mostly just old 2ch receivers minus the tuner.
 
TLS Guy

TLS Guy

Seriously, I have no life.
A Y'all Tube channel I watch sometimes, Skylabs Audio ranked his top five vintage integrated amps under $1000. This guy has a vintage audio store in Des Moines. His list was:
5. Sony TA-1130
4. Sansui AU-7700
3. Kenwood KA-7100
2. Pioneer SA-8500
1. Yamaha CA-1010
I was certain that the Marantz 1060 would be on the list, even high on the list. So I asked him about that. He replied "The 1060 was off, then on, then off. Pushing a grand at 30wpc, we'll put it at number 6 :) "
That's interesting. I got a crazy good deal on mine with a wood cab and not a scratch on the faceplate for $250 earlier this year. Plus mine has never been tampered with (except by me when I cleaned the pots) and sounds gorgeous.
Do you guys agree with his list? I once owned a KA-7100, but not familiar with the others.
There is one vintage integrated amp that stands head and shoulders over all the rest and that is the Sugden A21 from 1967.

 
Last edited:
TLS Guy

TLS Guy

Seriously, I have no life.
Arthur Sugden was a brilliant engineer. This little class A integrated amp just exudes quality. It has superb SNR and sounds just perfect. It is about the only class A solid state amp I know that is incredibly reliable. I used one in a system I put together for my sister in the late sixties. It has been in daily use since then, so for over half a century now without an issue. They are still highly sought after. Richard Allen also made them under license and badged Richard Allen, but they are the same amp.

The amp has an exceedingly low part count due to its excellent design which contributes to its longevity.
 
Last edited:
lovinthehd

lovinthehd

Audioholic Jedi
Arthur Sugden was a brilliant engineer. This little class A integrated amp just exudes quality. It has superb SNR and sounds just perfect. It is about the only class A solid state amp I know that is incredibly reliable. I used one in a system I put together for my sister in the late sixties. It has been in daily use since then, so for over half a century now without an issue. They are still highly sought after. Richard Allen also made them under license and badged Richard Allen, but they are the same amp.
So any measurements to back that up? Why would one want a class A amp in any case?
 
D

dlaloum

Full Audioholic
The sugdens were good...

I was always a fan of the Quad setups a Quad 33/303 or 33/405 ... they do need to have the circuits updated to get close to modern SINAD response, but all of that is available in the public domain for DIY... or there are a number of places that will do it for you!

Also the later generation (my personal favourite) the Quad 34 or 44 with either a 405 amp or 606 - the aesthetic of a later generation, with that superb TILT knob... - again input circuits can be updated for improved SINAD

Either of those pairings should be possible under $1k

(cheating a bit as these are pre/power combos... but they are quite compact and great performers)
 
TLS Guy

TLS Guy

Seriously, I have no life.
So any measurements to back that up? Why would one want a class A amp in any case?
Not that I can find from the early days, but distortion was 0.25% at 12 watts. Sugden would not lie about specs. It was 1967 and solid state amps were awful and unreliable.

1967 was also the year that Quad produced the 303. That was A/B but the first solid state amp to have decent power for those days, 45 watts per channel into 8 ohms.



The 303 is an incredibly reliable amp. It is a power amp designed to be used with the 33 pre amp. I have two 303s not currently in use, but as far as I know still in working order. The oldest is 55 years old, and was my first solid state amp. The design used triple output transistors, so three output transistors per channel. Peter went back to this in the 606 and 909 power amps. So my 909s have six output transistors per channel.

The BBC put in a huge order for 303s, and used a modified version extensively for line amps between studios and transmitters.
 
C

carlosmiguez75

Audioholic Intern
Solid list, but I get why you’d want the Marantz 1060 on there.
 
Squishman

Squishman

Audioholic General
Here's my 1060. I have souped-up walnut Minimus 7's hooked up to it plus a floor-firing 10" Klipsch subwoofer. I wish you could hear this little system. I stuck the pointers on the knobs with electrical tape because it is high on a shelf where I cannot see the top of the knobs.
 

Attachments

M Code

M Code

Audioholic General
A Y'all Tube channel I watch sometimes, Skylabs Audio ranked his top five vintage integrated amps under $1000. This guy has a vintage audio store in Des Moines. His list was:
5. Sony TA-1130
4. Sansui AU-7700
3. Kenwood KA-7100
2. Pioneer SA-8500
1. Yamaha CA-1010
I was certain that the Marantz 1060 would be on the list, even high on the list. So I asked him about that. He replied "The 1060 was off, then on, then off. Pushing a grand at 30wpc, we'll put it at number 6 :) "
That's interesting. I got a crazy good deal on mine with a wood cab and not a scratch on the faceplate for $250 earlier this year. Plus mine has never been tampered with (except by me when I cleaned the pots) and sounds gorgeous.
Do you guys agree with his list? I once owned a KA-7100, but not familiar with the others.
He missed the boat big-time, left out a couple... :rolleyes:
There are (2) integrated amplifiers that sold well into the 000s world-wide, that were great performers and excellent value. These were the Marantz 1060 and NAD 3020. Both had great features and respectible sonic performance..

Just my $0.02... ;)
 
D

dlaloum

Full Audioholic
He missed the boat big-time, left out a couple... :rolleyes:
There are (2) integrated amplifiers that sold well into the 000s world-wide, that were great performers and excellent value. These were the Marantz 1060 and NAD 3020. Both had great features and respectible sonic performance..

Just my $0.02... ;)
The NAD 3020 was a great first amp, and I helped a friend buy one and set one up back in the day...

But it was also substantially power constrained... not exactly a "powerhouse".
 
TLS Guy

TLS Guy

Seriously, I have no life.
The NAD 3020 was a great first amp, and I helped a friend buy one and set one up back in the day...

But it was also substantially power constrained... not exactly a "powerhouse".
Those were very unreliable. I had at least two brought to me for service. I would personally put those in the junk category. Poor quality components and put together like a bird's nest.

NAD 3020



Quad 33



Quad 303



 
Last edited:
TLS Guy

TLS Guy

Seriously, I have no life.
Here's my 1060. I have souped-up walnut Minimus 7's hooked up to it plus a floor-firing 10" Klipsch subwoofer. I wish you could hear this little system. I stuck the pointers on the knobs with electrical tape because it is high on a shelf where I cannot see the top of the knobs.
They a pretty puny speakers. I have a couple of small bookshelf speakers with Vifa drivers, drivers I designed and built 30 years ago. I voiced them so that they could be placed on a shelf close to a wall rather than stands. I don't think I will ever have a use for them again. If you want them for that system you are welcome.
 
Squishman

Squishman

Audioholic General
They a pretty puny speakers. I have a couple of small bookshelf speakers with Vifa drivers, drivers I designed and built 30 years ago. I voiced them so that they could be placed on a shelf close to a wall rather than stands. I don't think I will ever have a use for them again. If you want them for that system you are welcome.
Well that's great! I imagine they're very good if you designed and built them. Thank you!
 
D

dlaloum

Full Audioholic
Those were very unreliable. I had at least two brought to me for service. I would personally put those in the junk category. Poor quality components and put together like a bird's nest.

NAD 3020



Quad 33



Quad 303



I still have an old and still working well 303...

My friend with the 3020 had it for at least 10 years before I lost contact with him... with no reliability issues.

But yeah in terms of engineering, and being designed for maintenance /service, Quad is hard to beat!
 
newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top