Rythmic question

[bsf]

When i use the LFE input i get a slight humming noise ? When i use the line in, it goes away
thoughts?

 

[3db]

When i use the LFE input i get a slight humming noise ? When i use the line in, it goes away
thoughts?

Double check your connections and ensure the connectors are clean. If the hum still persists, swap out the cable for another. If the hum persists after that, check it with another subwoofer. If the hum exixts, then there is a problem with the AVR. If the hum goes away, then it would be a problem with the amp on teh sub.

 

[ATLAudio]

Also make sure your sub gain (vol) isn't more than 75%

 

[bsf]

is there an advantage to using the LFE vs the line input?

 

[3db]

is there an advantage to using the LFE vs the line input?

Shoot Rythmik an email regarding this. Brian Ding or Enrico Castagnetti will get back to you. I found them most helpful

 

[shadyJ]

is there an advantage to using the LFE vs the line input?

Supposedly the LFE input on some of the Rythmik subs extend the upper range response.