Programming my URC MX 650

[newb]

I know some of you have URC remotes. I'm wondering if you have any codes already figured out for the following products, and if so, how much will they set up automatically and which functions will I have to program (other than macros that is)?:

Pioneer 1150
Yamaha 663 (RCVR)
Phillips DVP 5960/37 (DVD)
Motorola DCT 3412 I (cable box)

Thanks for the replies...

 

[bandphan]

all of the gear accept the 663 are in URC database and you can use the 659/661. Pioneer also has .mxf files on their website

 

[newb]

Logging into the database

Is there a special method to getting into the database online, or is the manual the most up to date codes? I have heard (not 100% certain) that only installers can log into a database on the site.

 

[bandphan]

Is there a special method to getting into the database online, or is the manual the most up to date codes? I have heard (not 100% certain) that only installers can log into a database on the site.

My appologies, I thought you had the 850 not 650. You will have to program some of the newer features by learning. The majority of the base functions will be in the pre-programed codes.

 

[jcPanny]

URC Programming

I have one of the low end URC remotes and I had best results manually creating the menus and learning most of the commands from my other remotes. This way you have convenient access to all the functions you need. It takes a little time to setup, but it is worth it.