onkyo tx sr608

[hossfu]

why cant i listen to Pandora radio from my tv, streaming through zone 2 of my reciever? i have installed RCA cables from the tv to the reciever so the signal will be in analog form (as required by onkoyo).

 

[TLS Guy]

why cant i listen to Pandora radio from my tv, streaming through zone 2 of my reciever? i have installed RCA cables from the tv to the reciever so the signal will be in analog form (as required by onkoyo).

How are you sending the signal from Pandora to the receiver? If you are sending it digitally there will be no output at the zone 2 outputs.

 

[hossfu]

onkoyo tx sr608

im sending the signal from my xvt55 tru led vizio tv, to the reciever via RCA cables. although i also have an HDMI cable linking the two, and an optical cable. i've tried turning off all digital outputs linking the tv and reicever so that the signal can be sent to the reciever through the RCA cables, but to no success. i'm at wits end with it. i'm sure i'm just not doing something correctly and is a simple fix. any help would be appreciated.

 

[adk highlander]

Did you try turning off the internal speakers? Page 26 of the manual says:

1. Turn off the power to the HDTV and Receiver/Amp.
2. Using an audio cable (white and red connectors), connect the
cable to the audio input connectors on the Receiver/Amp and
connect the other end to the AUDIO OUT audio connectors on the
back of the HDTV.
3. Turn on the power to the HDTV and Receiver/Amp.
4. Press the MENU button on the remote control to open the OnScreen Display (OSD) menu.
5. Press ▼ on the remote control to highlight the Audio menu, and
then press OK to select.
6. Press ▼ on the remote control to select SPEAKERS.
7. Press ► on the remote control to select OFF so the sound from
the HDTV will be routed through your Receiver/Amp system.