Need advise on Onkyo SR602 issue

[arevee]

Guys,

I have an Onkyo SR-602 7.1 receiver which I run in 5.1 mode with Polk speakers. During the past few days, I noticed that the sound wasn't really upto the mark. Then when I did a test-tone I realized that my surrounds and woofers was not making any sounds at all. So, all I was hearing was from the Center, FL and FRight.

I have tried everything possible to make them all play. I am sure I hit some wrong button on the remote which messed up my settings. Any advise on how to fix this issue?

venkat

 

[MDS]

I have tried everything possible to make them all play.

What have you tried?

I would first go into the setup menu to sp. config and make sure that the surrounds are set to Yes. Also make sure that you haven't engaged the 'B' speakers.

 

[arevee]

I've made sure that all the wires were still in place and connected properly.
I checked the speaker config on the receiver- all speakers are "active"
I tried various pre-sets. Nope! no luck yet

I am not sure what the B-speakers are...?

 

[brendy]

I have the 602.There are no "B" speakers.Here is a shot in the dark - do you have Zone 2 active ? Also check the channel levels and make sure none are turned all the way down.