PSB Imagine mini Speaker Preview

A

admin

Audioholics Robot
Staff member
With a response down to 55Hz both on and off axis, the specs on the PSB Imagine mini speakers (a speaker so small, it doesn't even get a capital letter) are almost too good to be believed. They utilize a 4" Clay/Ceramic filled Polypropylene Cone woofer and a 1" Titanium Dome tweeter. The speakers present an 8 ohms nominal, 6 ohm minimum load which should be no problem for any amp on the market these days. At 5.75†wide x 9.25†high x 8.3†deep and weighing 6.5 lbs, the PSB Imagine mini speaker should fit into nearly any environment. The question is whether your budget can fit these $760 a pair mini speakers.


Discuss "PSB Imagine mini Speaker Preview" here. Read the article.
 
B

bikemig

Audioholic Chief
Specs and program watts

I've thought about getting these for a desktop set-up but they are expensive for small bookshelf speakers. The rear port for bass may present some difficulties as well when setting them up on a desk. One thing I am curious about is that the specification states that input power is from 10 to 80 watts and program is 80 watts. I'm not sure what program watts means.
 
S

SteveinMinn

Audiophyte
Love them - worth the money

I got an early demo pair of the Minis from Saturday Audio Exchange in Chicago, and I love them. They're worth every penny. I have them installed in my kitchen, where I end up listening to most of my music anyway, and am driving them with an NAD 326bee. (My living room setup has the PSB Imagine Ts and NAD 375bee. Love that too.)

The bass is amazing for speakers this size, and the midrange, in true PSB style, absolutely sings and lacks the fatigue I feel with my Paradigm Studio 10s (which, to be honest, are punchier on bass and treble.)

If you can afford them and need small speakers for a specialized application, you won't be disappointed.
 
3db

3db

Audioholic Slumlord
They measure extremelry well as shown below




The Imagine Mini’s listening- window response (a five-point average of axial and +/–15-degree horizontal and vertical responses) measures +0.93/–1.19 decibels from 200 hertz to 10 kilohertz. An average of axial and +/–15-degree horizontal responses measures +1.40/–1.38 dB from 200 Hz to 10 kHz. The –3-dB point is at 80 Hz, and the –6-dB point is at 71 Hz. Impedance reaches a minimum of 4.03 ohms at 284 Hz and a phase angle of –61.64 degrees at 132 Hz.
 
newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top