metal handles near back of sub

[pjoseph]

I am about to make the cut-outs for the handles for my diy sub.
One on each side just want to make sure it will not create any problems if the handles are a few inches from the back of the sub?

thanks

 

[adwilk]

I am about to make the cut-outs for the handles for my diy sub.
One on each side just want to make sure it will not create any problems if the handles are a few inches from the back of the sub?

thanks

If I'm understanding correctly, you should be just fine...

Just grab the thing by the foam surround and binding posts...

 

[pjoseph]

I am referring to the interior....
The sub is on the front side of the box, I am putting handles on the left and right side of the box.
The handles mount flush but stick out about an inch on the interior of the box

So looking in from the back of the box you have the sub magnet in the middle then the metal handles one on the left and one on the right.
Here is a link for the handles, take a look i think it may help you understand what i am talking about
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=262-821

Just want to make sure that the metal from the handles even though they are about 2 inches from the magnet will not create problems.

thanks

 

[just-some-guy]

no problems