Making SVS Ultra Surrounds Wireless

[gatorgene]

1. 
   I live in a condo with concrete ceilings, the wall I would normally run speaker wires is floor to ceiling exterior glass. The right speaker distance is 12" from the receiver and 16' on the left side. I am currently using a Rockfish wireless kit on HTIB speakers. I want to set up the Ultra Surrounds with SVS Duet Mode, which creates two separate speakers in each cabinet. Can this be done or should I show wires at the edge of the tile floor and the aluminum window frame?
   
   Thanks for any advise.
   
   

 

[TheWarrior]

1. 
   I live in a condo with concrete ceilings, the wall I would normally run speaker wires is floor to ceiling exterior glass. The right speaker distance is 12" from the receiver and 16' on the left side. I am currently using a Rockfish wireless kit on HTIB speakers. I want to set up the Ultra Surrounds with SVS Duet Mode, which creates two separate speakers in each cabinet. Can this be done or should I show wires at the edge of the tile floor and the aluminum window frame?
   
   Thanks for any advise.
   

These are passive speakers, so they have to have a wired connection to the amp. Duet Mode requires 2 channels from the amp.

 

[j_garcia]

You can essentially make them wireless, but you will need a wireless system to pass signal to the external amp. As mentioned, you will still need to run wires to the speakers from the amp regardless.