looking for record out on rx-vo295 yamaha

[redd454]

hi, i have been attempting to link several rec. for some time, the advice i got from this site, since i am not interested in increasing power, just all rec. continue same music from first rec, i have been told to go from record out on rx-vo295 to aux in on next rec., i cannot find record out, i wish to leave remote on source, so tv, radio and so on can be selected from remote, i had assumed front pannel switch need not be switched to tape or rec. these are older rec., but good ones record out is not present on another one either, i suppose i can go main,s out to aux in, i am doing this as all my speaker systems are towers, and only wish to use a/main outs on each pair from each receiver' adjustable seperatly, by their own factory remotes, advise app., been battleing this a while, when i can

 

[everettT]

I'm not sure what you mean you cant fin record out. On the rear choose rec out from md/tape. On the front panel turn the dial to record out.

 

[redd454]

yes i see this, but by turning record out on front pannel, wont this interupt with my signals to tv/dbs ect. i am used to contrlling this with my remote, as well as on screen adjustments, center source position

 

[everettT]

yes i see this, but by turning record out on front pannel, wont this interupt with my signals to tv/dbs ect. i am used to contrlling this with my remote, as well as on screen adjustments, center source position

No, it's going to play what ever source you choose.

 

[redd454]

ok, thats without having to switch from rec. out right?, do not wish to have to manually switch sources

 

[everettT]

The sources on the main ins will play through rec out.

 

[redd454]

those are on main in, is a yamaha eq, rest comp. are hooked as indicated, tv digilinked in, all this eq. must play in conjuntion from each comp/rec individual remote, i have been told record out to aux. in is the way to go, just never told to select on front pannel, will give a try, alot of work each time, thanks

 

[redd454]

basically, when i switch remotely, from one source to another, tv/dbs-radio/stereo ect. all music shall be reprodused, exactley as if from first receiver, without interuption, if set on record out, on front pannel, my remote will work exactly as it did when i had the pannel selector set to remote?

 

[everettT]

basically, when i switch remotely, from one source to another, tv/dbs-radio/stereo ect. all music shall be reprodused, exactley as if from first receiver, without interuption, if set on record out, on front pannel, my remote will work exactly as it did when i had the pannel selector set to remote?

Yes. I've had the 995 and 1095 hooked as zones this way. As a note I'd recommend you dont abbreviate when you post unless it's an acceptable one ie SPL. It makes it hard for others to discern your post.

 

[redd454]

Yes. I've had the 995 and 1095 hooked as zones this way. As a note I'd recommend you dont abbreviate when you post unless it's an acceptable one ie SPL. It makes it hard for others to discern your post.

 

[redd454]

yes sorry, i'm real bad about that, you've answered my final question's, now i will get going, i have put things off, due to time plus, answers i have gotten though great, have not been complete, such as putting front selector on record out, don't like guessing on things i'm unsure of, thanks alot, as long as every thing works the same with my main remote, i'll be fine, if i do need more power down the line on other receivers i can use main outs to aux. in or main in's