Kenwood KM-207 Power Amplifier Specs?Which speakers?

[walter227]

Hello everyone. I have here two Kenwood power amplifiers. I am trying to find info on these amps. They are a Kenwood KM-106,and Kenwood KM-207 , both power amplifiers.

Does anyone have any info on the power output (WPC)? I have heard 100 watts rms wpc, 125 watts rms wpc, 150 watts rms wpc. Can someone help me please? I am in the market to purchase some good speakers for these , first off having the specs of the amp(s) would help , then some advice in recommending medium price range speakers if possible. Please help if you can!
Thanks in advance , Peter

 

[AVRat]

My research shows the 106 - 125W & 207 - 200W. Are the speakers for HT or music use? Polks and Infinitys are on sale now for great discount. How much are you looking to spend on the speakers?

 

[walter227]

My research shows the 106 - 125W & 207 - 200W. Are the speakers for HT or music use? Polks and Infinitys are on sale now for great discount. How much are you looking to spend on the speakers?

Where can I find this information,,I have searched hi and lo , and have found very little on these. Any help appreciated!
TIA

 

[mulester7]

Where can I find this information,,I have searched hi and lo , and have found very little on these. Any help appreciated!
TIA

.....Walter, AVRat don't play, he's always right on the mark....it indeed looks like the 106 boasts 125 watts a channel at 8, and 200 a channel at 4....the 207 has 200 watts per channel at 8, and "probably" right at 300 a channel at 4, it has A and B binding posts, so we know you can parallel....my Japanese is a little rusty on that "probably"....so, you can go with either 8 or 4 ohm speakers, and, you could even parallel two sets of 8 ohm speakers on either amp for a total of 8, 8 ohm speakers on both amps filling the room....older Kenwood was very good stuff, imo....the amps should be very clean and do a good job for you.......

http://cgi.ebay.com/KENWOOD-KM-106-STEREO-POWER-AMPLIFIER_W0QQitemZ110026457508QQcmdZViewItem

http://cgi.tw.ebay.com/Kenwood-KM-207-Stereo-Power-Amplifier-200-WPC-amp_W0QQitemZ160024008141QQihZ006QQcategoryZ39783QQcmdZViewItem

 

[walter227]

Yes , that is my plan , run both amps at once,always wanted to do a window test ,,


Thank you much for the replies! Will repost when system is up and running.

Regards Walt

BTW AVRat, Thank you for the information , no disrespect intended.

 

[AVRat]

None taken, I just did a web search on those models to get whatever information I could. Based on the amps outputs, the Polk RTi10s seem like a perfect match due to their requirements in a bi-amp configuration. http://www.crutchfield.com/S-O2DAFs1nyTm/cgi-bin/ProdView.asp?g=12000&I=107RTI10C&search=polk
http://www.oaktreeent.com/Stereo_Amps_and_Pre-Amps.htm

 

[Dave H.]

I just picked up a KM 207 for $10.00 at a garage sale & it rocks my Klipsch RB15's!
New guy here. Looks like a pretty good forum.
Dave Huffman