This Musical Fidelity A3.2 integrated amp is for sale at $850. It was bought in 2003. Comes in original box with manual and remote. Not a scratch on it. If interested let me know so I can send you more pictures.
This integrated has a theater input which lets you connect it to your receiver's pre-out and integrate it to your home theater as your mains amplifier.
Thanks
This price is not set in stone!!!
From Musical Fidelity:
OUTPUT:
Voltage RMS 30 Volts 20Hz to 20kHz.
Peak 85 Volts
Power 115 Watts per channel into 8 Ohms (20.5dBW).
185 Watts per channel into 4 Ohms
Peak-to-peak output current 24 Amps
Damping factor 120
Output devices per channel Two
Pre-output impedence 50 Ohms
LINE OUTPUTS:
Total harmonic distortion + noise 20Hz to 20kHz < 0.01%
Signal / noise ratio input sensitivity > 98dB 'A'-weighted for 115 Watts into 8 Ohms, 250mV
Overload margin 26 dB
Channel separation > 70dB typical
Frequency response
20Hz to 20kHz, +0, -0.2dB
PHONO INPUT:
Frequency response reference, IEC RIAA See graph below
Signal/ noise ratio > 94dB Moving Magnet 'A'-weighted.
> 88dB Moving Coil 'A'-weighted.
Input sensitivity 2.5mV Moving Magnet
350µV Moving Coil
Input impedence 47k Ohms
Overload margin 24dB
Input Four pairs line level RCA connectors. One pair phono (MC or MM, switchable) RCA connectors.
Output Two amplifier channels via one pair per channel binding posts. One pair RCA audio outputs controlled by the volume. One pair RCA tape record fixed line level output.
View attachment 4050