Denon X3400H OSD not being shown when using Sony UBP-X700 UHD player

lovinthehd

lovinthehd

Audioholic Jedi
Cables aren't really 2.1 (the designation for hardware they may work with)...they're defined by bandwidth/speed. Doubt the cable is your issue unless you have other issues with 4k content? The on screen display is all that important all the time? (kinda how I look at it)
 
T

Trebdp83

Audioholic Samurai
Those settings look pretty good. HDMI cables that are Premium Certified for 18gbps would be sufficient for 4K HDR @60hz . Ultra Premium Certified cables capable of 48gbps will give you 4K HDR @120hz which is what the TV is capable of displaying though the player and AVR are limited to 4K HDR @60hz.
 
B

baneling

Audioholic Intern
Cables aren't really 2.1 (the designation for hardware they may work with)...they're defined by bandwidth/speed. Doubt the cable is your issue unless you have other issues with 4k content? The on screen display is all that important all the time? (kinda how I look at it)
It's just inconvenient. Plus it's stupid really. 4k content shouldn't stop the osd from working. It goes from the avr directly to the the tv via the hdmi cable from the hdmi out on the avr. I don't get why the 4k player has anything to do with it. Earlier I was watching a 4k channel on the cable box and the osd worked perfectly. I think it's this sony player that's cheap. I will plug the player in my onkyo avr and see if its osd works.
 
B

baneling

Audioholic Intern
so this OSD problem with 4k content, is it only with Denon/Marantz receivers or with all receivers?
 
B

baneling

Audioholic Intern
I have the disc player plugged into my onkyo avr and all GUI works fine.
 
lovinthehd

lovinthehd

Audioholic Jedi
It's just inconvenient. Plus it's stupid really. 4k content shouldn't stop the osd from working. It goes from the avr directly to the the tv via the hdmi cable from the hdmi out on the avr. I don't get why the 4k player has anything to do with it. Earlier I was watching a 4k channel on the cable box and the osd worked perfectly. I think it's this sony player that's cheap. I will plug the player in my onkyo avr and see if its osd works.
Yeah I've run into some of the osd things even with my Oppo, but I have an older Denon 4520 and really don't use osd much except for basic setup either....altho the volume bar can be nice. I think I've run into sometimes with my Oppo that my older Denon 4520 has something that won't display....but I'd have to play with it to see what the specific circumstance was, too. I think in my case it had to do with how I setup the i/p scaler in video mode....but its been a while. Hope you find happiness :)
 
B

baneling

Audioholic Intern
Guess what. Due to other problems, i had to reset my x700 disc player back to factory defaults and now the gui works perfectly.
 
B

baneling

Audioholic Intern
Sorry i spoke too soon. Its not fixed, but now i know what causes the problem. It happens when DV is enables on the disc player, at least when using the USB port to watch a movie. I have to double check when watching a movie on disc. I'll do that later. If you don't hear from me about this, it means the same thing applies with a disc movie
 
newsletter

  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top