I am having trouble hooking my Tivo up to my receiver. Here is the equipment I am using:
-TiVo Series2 Dual Tuner DVR
-SD Cable Box
-Onkyo TX-SR606 AV Receiver
Based on the TiVo setup instructions, this is how I thought I should connect the equipment:
-Using an RF splitter, I have a coax cable going to the CABLE IN of the cable box and another coax cable going to the CABLE IN of the DVR.
-Using S-Video and analog audio input cables, I have connected the Audio/Video OUT of the cable box to the Audio/Video IN of the DVR.
-Using S-Video and analog audio input cables, I have connected the Audio/Video OUT of the DVR to the CBL/SAT inputs of the receiver.
-I have then used an HDMI cable to go from the HDMI OUT of the receiver to the HDMI IN of the TV. I have tried this step using S-Video and analog audio input cables instead of the HDMI but I still get nothing on the TV.
If I bypass the receiver and use S-Video and analog audio input jacks to connect the Audio/Video OUT of the DVR to the inputs on the TV.
Any assistance/suggestions would be greatly appreciated.
Thanks
