Additional amp recommendation for Denon avr-x3600h

[rrj]

Current setup is 5.1 using NHT SuperZero 2.0s (5) powered by a Denon 4311ci receiver and an HSU STF-2 sub. My room measures 14.5(L) x 10.5(W) x 8.9(H). Purchased a 4k TV and looking to purchase the Denon avr-x3600h to add video switching as well as adding 11 channel Atmos processing. Would like to get any recommendations/suggestions of an eternal amplifier that would be good to power the front left and right SuperZero 2.0s (75w, 8ohm). I have an old Onkyo m-282 amplifier but not sure due to its age if it would be a good fit. Plan on picking up additional SuperZero 2.1's from Amazon to complete a 7.1.4 setup. Thanks in advance!

 

[WaynePflughaupt]

There is no reason why the 3600 won’t work fine with those speakers. But if you already have the M-282m, no reason not to use it.

Regards,
Wayne A. Pflughaupt

 

[PENG]

Current setup is 5.1 using NHT SuperZero 2.0s (5) powered by a Denon 4311ci receiver and an HSU STF-2 sub. My room measures 14.5(L) x 10.5(W) x 8.9(H). Purchased a 4k TV and looking to purchase the Denon avr-x3600h to add video switching as well as adding 11 channel Atmos processing. Would like to get any recommendations/suggestions of an eternal amplifier that would be good to power the front left and right SuperZero 2.0s (75w, 8ohm). I have an old Onkyo m-282 amplifier but not sure due to its age if it would be a good fit. Plan on picking up additional SuperZero 2.1's from Amazon to complete a 7.1.4 setup. Thanks in advance!

The SuperZeros can't take much power anyway, but it is still better to use the X3600H to drive the L,C,R that are the more demanding channels. Use the less powerful m-282 to drive the surr left and right.

When you do get the 7.1.4 setup, there is another trick you can do with the 3600 but let's save it for later to keep things simple for now.

 

[AcuDefTechGuy]

11 speakers for a little room that is only about 10FT x 14FT x 9FT?

I would do either 5.1.2 or 5.1.4 at most.

Just use the X3600 without any amps.

 

[William Lemmerhirt]

11 speakers for a little room that is only about 10FT x 14FT x 9FT?

I would do either 5.1.2 or 5.1.4 at most.

Just use the X3600 without any amps.

Yes. This.