Search results for query: Monolith

That's the RZ70, the RZ3100 is a much lower model, though I suspect it would still be able to do at least 2 V at very low distortions, should have no trouble driving the Monolith amp to its rated output.

...THX series are very well rated. James Larson performed a detailed review: https://www.audioholics.com/bookshelf-speaker-reviews/monoprice-monolith-thx-365t-thx-365c Those speakers are rated as 4 ohm drivers. One or two subwoofers would need to be added for a full low frequency reproduction...

Placement and crossover probably created the issues you heard or perceived. If you heard issues both ported and as sealed, that would likely explain it. The SVS response is flat free air, so your rooms effect is creating problems.

You will need a short y-splitter with one female end to 2 male ends plug them into the left and right input on the sub but I’d still up the subs gain first then rerun the calibration .

I have no doubt that malpractice has been and will be found, just like pretty much every branch of health care. If it's as bad as you say, the harm caused will still probably pale in comparison with that caused by RFK Jr. It'll take years to unfcuk your health care system after he is done with it.

A minor one, unless you need/want it, is that the 6800 has a "dialogue lift" increasing the volume level of speech frequencies for the center channel while the "same" on the 3800 just increase the volume level. Probably other differences as well, but you'll have to read the manuals for details. :)

Monolith by Monoprice 16in THX Certified Ultra 2000-Watt subwoofer seems to be on an incredible sale today. Normal price $2300, on sale for $1840 and free shipping. In checkout apply coupon BIG25 for another $460 off. Total $1380 shipped. I don't know how long that lasts, but it's up today. I've...

? I know the Manuel says that has anyone tested it rz 70 says same but tested at 4 v

...really rated for 4 ohms, as they expect you to use the impedance setting. See manual p.40: Based Audioholics review, I would think the Monolith isn't that hard to drive, but again it depends on factors I mentioned above. For example, if you listen to a maximum level of 10 dB below...

But this is a good one, is there anything the 6800 does that a 3800 with say a Monolith 7x and a Outlaw 7000x can't do? Or if you were going to use AMPS for most to all channels in both, is there anything that would be different or is the software and outputs to the pre amps exactly the same...

Keep in mind this is "V" so 1.6 times is almost 4.1 dB, though Onkyo's 1.0 V spec is obviously just what they called "rated", not maximum.

For that sale? Heck yeah it's worth it And the M12 is a definite upgrade

Pardon my ignorance. My old sub only has one input. Does the Monolith manual care if you plug the cable into either input? If I'm interpreting your pic correctly... try plugging into input 1 instead of 2 if the manual says it's okay?

The OP says he has no funds for a bigger amp, so he will have to go easy on the volume control fans not withstanding. Those speakers are real receiver busters. But more to the point they are another in a long line of incompetently designed speakers from multiple manufacturers. The impedance...

Are you streaming it off a specific platform??? or a CD or something? No bass could be a room issue , or caused by a bad audio source. You could had tried sealing the ports instead of getting rid of it. How can a subwoofer that powerful have no bass? Did you try other sources like a Movie ? Was...

...the Klipsch Nines today along with a Wiim Ultra. The Eximus One stands I got from Amazon are not stable enough, so I've ordered a pair of Monolith from Monoprice... we'll see if they're better. Anyway, the sound is fun. They make a good addition to my TV as a "centrerbar replacement", and...

My suspicion (without any objective support) is that it is in the upmixer... And if that is the case, then the benefits should extend through to lower end models that use the same software base... If such dramatic improvements are possible then we may have to start paying close attention to...

...tried setting it to small and large but left it at large because feels there's more output, should I leave it at small? it's these speakers: Monolith Encore T6 My gain knob on the sub is at like 90% and it shakes the room fairly well, idk if my expectations were too high, I thought like 50%...

...looking? @Danzilla31 Good choice on your part. Monoprice makes some really respectable stuff, especially when you consider the price point. I own two of the Monolith 7X 200wpc power amps, one of which is in my dedicated theater powering the ceiling speakers. Just can't beat the bang for the...

Hi Mark! Outlaw power amps are built by ATI in the US, so are the Monoprice Monolith amps. Both product lines are well built and well rated. I don't own any of them but I wouldn't hesitate to buy one of their products if I had the need...