Hi everyone
I'm new here with noob questions.
This is my current setup
Onkyo RZ810
Dali Opticon 6 for the front
Dali Opticon Vokal as the center
Dali Opticon 1 as surround.
Dali E12-F sub
I used the auto setup with the mic etc, it set my sub to 120hz ( but changed this to 90hz) as that was what it was recommending at according to the manual, all other speakers to 80hz in the cross over.
The overall volume seems low at the earlier stages, meaning i need to crank it near half way before i start getting a decent level of volume
I find when i play music via the playstation mainly spotify the setup works okay however when watching blu rays I do need to put it a lot louder to reach the same volume as I would to say listen to music. Also i find the dialogue to be extremely low, so what i have done is increase the center speaker to +7db and increase the fronts to around +4db along with the surr speakers.
The max volume is set to 0db or volume 82. I have not reached this volume level yet but my concern is i reach about volume 65-75 and it's good but in the back of my mind im thinking i have only another 7 digits left for max volume?
Do you think I should increase the max volume on the amp setting or not? Reason why i say this is because let's say when im playing music volume on around 50 would sound the same as volume on around 65 on movies.
Also since i have increased +7db on the centre speaker does that eat in to the max volume? So say max is 82 volume and ive increase the centre to +7 essentially is my max volume limit now 75 rather than 82?
I am kind of confused as to what's going on . What my amp and speakers can handle, I don't want to tweak settings and then blow something up.
Many thanks