Watts per channel

[Yungheat]

How many watts per Chanel will this reciver give wen all five Chanel's are driven I see that it's 85 watts when two Chanel's are driven


Reciver: Amplifier Section Channel 5.1
Rated Output Power (1kHz, 1ch driven) 100W (8ohms, 0.9% THD)
Rated Output Power (1kHz, 2ch driven) 85W (8ohms, 0.9% THD)
Dynamic Power per Channel (8/6/4/2 ohms) 110/130/160/180W

 

[Yungheat]

Help me please someone

 

[adk highlander]

We need to know what the make and model number is of the receiver you are looking at to be able to look up the specs. There is no way to answer your question with the information you have given us.

 

[markw]

Cheez louise, have patience. It' only been five minutes

Less. but before you pop a blood vessel, read, and comprehend THIS ARTICLE[/u].

Buut, the only one who could answer your question is the manufacturer.

 

[Yungheat]

We need to know what the make and model number is of the receiver you are looking at to be able to look up the specs. There is no way to answer your question with the information you have given us.

The model number is yamaha rx 373

 

[Yungheat]

My room size is about 15x15 is this good enough receiver I have floorstanding speakers

 

[j_garcia]

All channels driven is usually something big manufacturers don't like to report, just like their claim that this unit is "100W" even though that is only 1ch driven at 1Khz. My guess is that unit will deliver somewhere around 60-70W all channels driven, since they clearly don't list it on the site.

"floorstanding speakers" doesn't tell us anything with which to provide you a real answer.

 

[Yungheat]

I have polk audio monitor 60 s as my fronts will this receiver be able to work


Total Frequency Response 38Hz - 25kHz
Upper -3dB Limit 24 kHz
Lower -3dB Limit 48 Hz
Nominal Impedance 8 ohms
Efficiency 90 dB
Recommended Amplifier Power 20 - 200 watts per channel
Inputs Dual (bi-amp) 5 way binding posts

 

[twoeyedbob]

There's no issue ...the receiver will work...end of....
What you have to worry about is ...if i buy this receiver
Will i be looking to upgrade next year

Sent from my HTC Vision using Tapatalk 2

 

[PENG]

The RX-V373 should be fine for those speakers in your 15X15 room assuming they are in feet, and ceiling is no more than 10 ft high. As to how many WPC X 5, my guess is 30 to 40W at less than 1% THD, 20 to 20 kHz.

 

[Yungheat]

Is 30 -40 watts a lot or no sorry I'm new to homa audio

 

[markw]

You would do well to stop worrying about what you read. Start listening with your ears. If you did, you would realize that numbers don't always tell you what you'll hear. 20 watts can get hella loud.

 

[Yungheat]

Ok thanks for giving me the basic and not getting technical

 

[PENG]

Ok thanks for giving me the basic and not getting technical

Mark is right, there are many reasons why even 20W with all channel driven could be all you need in the real world. As he said, just try it out first and you ears will tell you.