John Dahl from THX discusses room modes (or peaks) and various ways to deal with them, including the use of multiple subwoofers, room treatments, and certain isolation and bass-trapping products. This video gives a great overview of what it takes to tame the frequencies in your room below 200Hz - where the room really makes itself known.
If you address the peaks, the valleys ultimately get alleviated. You can't actually "fix" nulls, only observe them. Fixing peak issues is the best way to fix null issues.
__________________
Clint DeBoer
Editor in Chief Audioholics
What about Nodes? They're more difficult to deal with no?
I have had some luck dealing with room nodes via active equalization but if you need to boost more than a few dB to fix it, DON'T do it! Sometimes changing the phase relationship between multiple subs just a bit can work, other times it simply makes it worse at a different seat. This is why its important to measure the entire listening area, not just the money seat when setting up a system.
__________________
Gene DellaSala
President, Audioholics Pursuing the truth in audio & video...
That was good information but some of the slides were hard or impossible to see. Also, I wish he would have gone into more depth about mechanical bass absorption. It's something I'm looking into. I suppose that could be a talk in and of itself.
Jim
__________________ Receiver: Marantz SR8002 Speakers: Jamo C605, Klipsch KSB 1.1 (surr), KSC-C1 Subwoofer: HSU VTF-3 Mk3 Sources: Oppo DV-981HD, Sony BDP S350, Xbox360, SOTA Sapphire TT (Sumiko Premier MMT arm, Grado Sonata Cart) Phono stage: Cambridge Audio 640P TV: Panasonic TC-P50V10 Cables: Belden 5000UE speakers, BJC LC-1 subwoofer, BJC Series 1 and 2, Oppo and Belden HDMI
A break-in period is an excuse made up by some audio manufacturers to get your ears used to the bad sound.
hello
1. indeed would be great if there's some way to see the slides
2. i have good results using this lay out:
- Hemholtz resonators in corners (jocavi acoustics)
- a line of identical subs at front wall, test different distance from the front wall though. can have dramatic effect; use identical subs when doing multisubs layout !!
- i always prefer having large front capable speakers so bass is differentiated and respects the movie mix: tighter bass for the LR and deeper longer waves from the subwoofers (.1 channel). this gives a way more natural and "impact rich" sound
3. placing subs at each mid wall works but can often be impractical in a typical HT
4. two vertical lines of subs also has great results but can also be a problem to setup/ besides there's almost no manufacturers (except Divatech (biosonic wall) and ATC in Germany who do this) or i think one or two ultra high end hifi speakers manufacturers. I wish velodyne, sunfire, jbl would do these.
Yet having two big towers with twin 12 or 15'' gunners and a floor line of subs and resonators give tremendous results.
- Hemholtz resonators in corners (jocavi acoustics)
How exactly do Helmholtz resonators work? They can be as much a detriment as a boon, correct?
I built a riser that is surely acting as one. I didn't buy fiber/wool to fill it with. Very large, 2x6's, but plywood instead of mdf. The commercial carpet is already stapled, and I don't think I'll ever figure this stuff out as it must be so depenent on room dimensions and measurements... but bringing it up in case that anyone can make a simple summation for lesser AVers.
I've finally implemented some HF bass traps for the HT. Four for the front. Anything helps it seems.
It seems that Gene knew exactly what he was doing in building his. I've noted with my riser that the tactile response is minimal, and I have a strong impression that the resonance area is of a higher frequency than I would like. The resonant/tactile frequencies are pretty minimal in amplitude, at least to the extent of being able to feel them with any great significance.
look at the absorbants, resonator section, "roundbasscorners"
cool stuff
available in many colors
120cm high; 22kg
Hemholtz resonator inside.
helps my demo room 2 going lower in FQ with less room resonance
ideally you need 4-8 of these ! stacked by 2 vertically, in each corner
it sucks down the corner increase and helps increase the nulls.
i also have a raiser. can't watch a movie without a raiser
much more cinematic.