Search results

  1. H

    Denon 3910 firmware update!!!!!

    I did not download it but I requested that it be mailed to me but up to now I still don't have it. According to Denon it doesn't come with the Denon link upgrade yet for the SACD
  2. H

    Guys Who Like It From The Bottom Or The Front

    Have you considered having both? M&K's subwoofers are what they call push-pull. There are two drivers in one enclosure, one facing front the other facing down. My opinion is that it gives you a deeper bass and at the same time shakes the room.
  3. H

    AVR5803A Upgrade? D-Link 3rd?

    I have the 5803A and 3910. The Denon link passes the signals for DVD-video and DVD-audio. The 5803 does the decoding automatically. Denon link was also approved to pass SACD but according to Denon it will take a while before they can send the upgrades on the 3910. There is another feature if it...
  4. H

    M&K speaker costs$$$$$ !

    Hello there! You are right, M&K's are expensive. I have two systems at home, one Yamaha and the other one is Denon. They are both connected to M&K speakers. The Yamaha is connected to consumer series speakers and the Denon is connected to Professional series speakers. Both system sounds...
  5. H

    Denon AVR 5803 and D-Link 3rd edition

    Hello! I have a 5803A and a 3910, and I still use the analog multi channel input for SACD. All you need are six cables and some configuration on both units.
  6. H

    M&K MX-70 subwoofer ?

    Why dont you contact M&K and have the speakers repaired. Thay do come with a 10 yr. warranty.
  7. H

    THX and music.

    Im using mps-2510p and 5310 subs. You can see this on the pro side of m&k. But, it does not matter if it is pro or consumer because m&K makes excellent speakers.
  8. H

    Denon 3910 SACD Subwoofer Out Issue

    thrang My setup is a Denon 5803a and a Denon 3910. When I listen to SACD, my input selector is set to multi-channel analog in. I get a subwoofer output with this setup. I'm not familiar with Marantz how the setup is being done. It seems straight forward to me when you have multichannel SACD...
  9. H

    THX and music.

    I am using a Denon receiver and M&K speakers. I think it sounds great for both HT and music. M&K's have a flat frequency response so if you have a bad aource they will sound bad. It is true that some speakers will sound good with HT and sound bad with music but I don't experience that with my...
  10. H

    Will any receivers do L/R/sub with no other processing?

    The Denon 5803 will do direct mode with sub.
  11. H

    DVD-A and SACD thru optical/coaxial

    TAVO I think you're correct. I use the denon link to pass dvd-a and this is the first time I saw a display on the 5803 that says "96khz". So I guess if you use optical it's only 48khz.
  12. H

    DVD-A and SACD thru optical/coaxial

    To answer question 1, you can pass dvd-a using optical but not sacd. Regarding question 2, optical doesn't pass sacd because it is copyrighted by sony. Number 3, yes the 3805 will decode dvd-a and sacd by utilizing the optical for dvd-a and the multi-channel analog inputs for dvd-a or sacd...
  13. H

    M&K ???

    Monty What are you using to drive your speakers? receiver or separates? I'm using a 5803 to drive the pro speakers I have but I'm using it as a preamp. The speakers I have are powered (MPS-2510P). I watch a lot of movies myself, even old ones. But if you haven't tried it yet, listen to...
  14. H

    M&K ???

    I am a big fan of M&K. I have 2 systems. One system is using the consumer products they have and one is using the Pro system. Like most of the people that replied I say they make excellent speakers. You don't see them in your regular electronics store is because they target the pro users like a...
  15. H

    will my old tv be compatible to newer dvd players?

    if your tv has an input for dvi/hdmi, then the answer is yes you can use a new dvd player with your old tv. Also another thing to consider is that you can also use component video if you want to connect a new dvd player to an older hdtv.
  16. H

    The most newbie-ish question ever asked of Audioholics! Pre-pro amps?

    Adding external amps to your receiver is one way of upgrading your HT. In my case for example, the main speakers are biamped using an external processor and amp. But, I still use the internal amps of the receiver for surround.
  17. H

    Denon DVD-2910 audio connection question

    your new 1910 should have an optical out which will carry the DD, DTS signals into the AV receiver.
  18. H

    Denon 5803 as preamp/processor or Anthem AVM20 or 30?

    I am using the 5803 as a preamp only. The speakers I use are powered. I lot of people will say why waste your money and pay for the power amps and not use them. Well I just like the features of the 5803 and the way it sounds. It does everything I want it to do. Gene is right the 5803 is...
  19. H

    Denon LINK Question

    I have a 3910 connected to a 5803A. I use multichannel connections for SACD/DVD-AUDIO. I use optical for everything else. You don't need denon link to decode DD,DTS and PLIIx. But I also tried using the denon link. If you want you can try it also. If I use the denon link to pass DVD-AUDIO...
  20. H

    Denon DVD-2910 audio connection question

    The way I connected my 3910 is I'm using the multichannel out for SACD/DVD-AUDIO and optical for everything else.
  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top