Search results

  1. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    ok, so i built two of these subs a couple years ago, and i was plenty happy. i ran it with the recommended ep2500 amp and it was fed by a denon 2809ci. i just rreceived a new denon x4000 which has has the ability to calibrate 2 subs. in my previous set up i stacked the subs and used one...
  2. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    just wanted to pop in to say thanks for the major contributors on this thread. i have been "living" with my dual kappa perfect setup for about a year now and am still thrilled with them. I ended up just using the Audyssey for the bass management and think it did a great job. if someone...
  3. A

    DO NOT BUY anything from AV123

    no, please don't...not until the rest of us get our money....well, maybe i'll spend some time and start my own thread: it appears the squeakiest wheels are the only ones getting greased!!
  4. A

    DO NOT BUY anything from AV123

    now hold on. MLS advertised through AV123's forums, as president and CEO for these sales.... I too "purchased" a mwf-15 in Oct 08. I too waited too long. I was given so many plausible excuses, and others who were waiting WERE getting their subs slow but sure.... finally i had enough and...
  5. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    try the fmod as close to the amp as possible...might help a bit, but it sounds like you are getting noise introduced somewhere, or have a ground loop
  6. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    it won't change the port, it will make room so the driver does not hit the large brace/insulation. if you leave the dimensions the same, but flush mount, you must move the mounting surface back towards the brace/insulation. shortening the short brace by the amount that you inset the front...
  7. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    the short brace is the horizontal brace that goes between the back vertical length of the port and the large vertical brace...which is what the back of the driver is closest too once mounted. hope this helps
  8. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    if you do shorten it inside...shorten the small brace by the same amount to ensure there is room for the driver
  9. A

    Behringer EP2500 Fan Modification

    i'll 2nd that. it took less than 15 min, and that is for someone with junior soldering skills. i thought i might be able to avoid doing this mod because i set the ep2500 at the front corner of the room the right speaker enclosure. that is about 12' from the primary seating area. with the...
  10. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    my two cabinets for about $65 out the door... :D
  11. A

    Mike's DIY 13av.2 PR subwoofer

    did this thread die?
  12. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    i just read your sub review thread...wow! are you thinking of trying out the 12vq build to compare? i'm sure you would do it in pairs or quads!!! yikes!
  13. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    dohhhh! i was tightening down the binding posts on the ep2500 for the first time and i twisted on right off!! anyone know if they can be replaced?? that or i'll have to see if that twistlock type speaker connector can be used. dang
  14. A

    the NOT so Perfect Infinity Kappa Perfect 12VQ build

    and this is the 12vqs vs.......my daughter
  15. A

    the NOT so Perfect Infinity Kappa Perfect 12VQ build

    to give some perspective...this is 12vqs vs my ol paradigm ps 1000
  16. A

    the NOT so Perfect Infinity Kappa Perfect 12VQ build

    yah, i caulked the snot out of them, then emailed the seller and gave him a few choice words...he was willing to take them back but a picture like i showed would have spared me from buying them. actually they worked out ok... no one will ever see them, but yours are definitely prettier!!
  17. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    ohhhh, don't worry, i'm planning getting max bang/buck out of the ep2500. i am going to wye the sub out so both inputs are fed. the sub channel will also get a 20hz fmod. if i am correct, i should be able to run this channel at 2ohms by running 2 sets of wires from the l/r posts of one of the...
  18. A

    the NOT so Perfect Infinity Kappa Perfect 12VQ build

    drawing to an end...
  19. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    i picked up my 12vq s today. they are substantially heavier than the 12.1 s. they are now at home in their boxes waiting to get placed. question. i plan on driving both subs with one channel of the ep2500, so they will be mono. i'm thinking about staking the subs in one of the front...
  20. A

    Simple 12" Infinity Kappa VQ MidQ Plans

    yes you do! i search for fmod, f-mod, harrison...etc. but i didn't check for fmodS . thanks. worked a deal on it.
  • RBHsound.com
  • BlueJeansCable.com
  • SVS Sound Subwoofers
  • Experience the Martin Logan Montis
Top